D "To" (Destination) Setting Using The "Your Call Sign - Icom ID-31A Advanced Instructions

Previous view
3
DR MODE <BASIC>
"TO" (Destination) setting (Continued)
■

D "TO" (Destination) setting using the "Your Call Sign"

The "Your Call Sign" memory stores the programmed
"UR" (destination) call sign.
When you select an individual station call sign for the
"TO" (Destination) setting using "Your Call Sign," a
gateway call can be made.
When you call the destination through a gateway, the
signal is automatically sent to the last repeater that the
station accessed.
So, even if you don't know where the station is, you
can make a call.
NOTE: If the repeater, set to "FROM" (Access Re-
peater) has no Gateway call sign, you cannot make
a gateway call.
Example: Select "TOM" from the "Your Call Sign."
Hold down
q
• The DR mode is selected.
Push D-pad( ) to select "TO," and then push D-
w 
pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Your Call Sign," and then
e 
push D-pad(Ent).
Push D-pad( ) to select "TOM," and then push D-
r 
pad(Ent).
• "TOM" is displayed on "TO."
NOTE: After selecting a destination, you can select
other stations in the UR field that are programmed
in "Your Call Sign," by rotating [DIAL].
for 1 second.
"TOM" setting is completed.
3-14
The call sign of
the selected sta-
tion is displayed.