Transceiver-To-Transceiver Cloning Using A Microsd Card - Icom ID-31A Advanced Instructions

Previous view
11
OTHER FUNCTIONS
Cloning function
■
D Transceiver-to-Transceiver cloning using a microSD card (Continued)
Push D-pad(Ent) to fix the file name.
r
The confirmation screen "Save file?" appears.
Push D-pad( ) to select "YES," then push D-pad(Ent)
t
to save.
D-pad
(Ent)
(�)
• While saving, a progress bar is displayed, then the "SD
CARD" screen is displayed after the save is completed.
Push [MENU]
y
play.
2. Remove the microSD card from the master trans-
ceiver, then attach it to the sub transceiver.
Turn OFF the master transceiver.
u
• Hold down the master transceiver's
Remove the microSD card from the master trans-
i
ceiver as shown at right.
Attach the removed microSD card to the sub trans-
o
ceiver, then turn ON the power.
3. Loads the setting data into the sub transceiver.
!0 Push [MENU]
!1 To display the SETTING LOAD screen, push
D-pad() to select the root item (SD card), and then
push D-pad(Ent) to go to the next level.
to return to the operating dis-
.
.
(Continued to the next page...)
• Removing the microSD card
Cover
Push in the
croSD card until click
sounds.
11-12
Cover
Pull out the microSD
mi-
card.