Vfo Frequency And Bank Scan - Icom ID-31A Advanced Instructions

Previous view

■ VFO FREQUENCY AND BANK SCAN

Checks the bank channels (priority channel) every
5 seconds, in sequence, while receiving on a VFO fre-
quency.
Push [V/MHz]
q
Rotate [DIAL] to set the receive frequency.
w
Push [M/CALL]
e
Push .
r
Push D-pad( ) to select "Bank Select," and then
t
push D-pad(Ent).
• The list of banks is displayed.
D-pad
(Ent)
(�)
Push D-pad( ) to select the bank, and then push
y
D-pad(Ent).
Hold down [SCAN]
u
Push D-pad( ) to select the scan type, and then
i
push D-pad(Ent) to start the bank scan (p. 8-8).
Push .
o
!0 Push D-pad() to select "PRIO Watch," and then
push D-pad(Ent).
• ON : When a signal is received on the prior-
ity channel, the memory bank mode is
automatically selected.
• Bell : When a signal is received on the prior-
ity channel, the "
in the VFO mode.
!1 Push D-pad() to select "ON" or "Bell," and then
push D-pad(Ent).
• The "PRIO" icon is displayed and the priority scan
starts.
• To cancel the scan, push [CLR]
to select the VFO mode.
to select the memory mode.
for 1 second.
" icon is displayed
.
[DIAL]
Example: Sequentially checks the memory channels
in bank "Z" every 5 seconds, while receiving
432.380 MHz.
Bank scan starts.
Appears
9-17
PRIORITY WATCH
Push [M/CALL] .
Push .
Hold down [SCAN]
for 1 second.
Push .
Blinks
Blinks
Appears
Checks the bank chan-
nel every 5 seconds.
(Continued on page 9-18.)
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21