Icom ID-31A Advanced Instructions page 191

Previous view
10
MENU SCREEN OPERATION
Menu items and Default settings (Continued)
■
NOTE: The default settings, shown below, are for the USA version.
The default settings may differ, depending on the version.
In this item, set the GPS options.
GPS
GPS Set
GPS Information
GPS Position
GPS Memory
GPS Logger* 2
GPS TX Mode
OFF
GPS(DV-G)
RANGE OR VALUE (Default is shown in bold)
GPS Select
Power Save (Internal GPS)
Manual Position
GPS Indicator
Position Format
Altitude/Distance Units
Speed Units
Alarm Area1
Alarm Area2
GPS Out
GPS Logger OFF or ON
1sec, 5sec, 10sec, 30sec or 60sec
Record Interval
<<GPS Logger Only>>
2
* Be sure to insert the microSD card into the
transceiver before selecting these items.
GPS Sentence RMC, GGA, GLL, VTG, GSA or GSV
GPS Message
OFF, Internal GPS, External GPS
or Manual
OFF, 1min, 2min, 4min, 8min or Auto
OFF or ON
ddd˚mm.mm' or ddd˚mm'ss"
m or ft/ml
km/h, mph or knots
0'05"/0.08'~0'15"/0.25'~
59'59"/59.99'
Limited, Extended or Both
OFF or ON
10-4
DESCRIPTIONS
Selects a GPS receiver that the trans-
ceiver receives its position data from.
Selects the internal GPS receiver power
save function.
Manually enters your current position.
Turns the GPS indicator ON or OFF.
Selects position format to display the
position.
Selects units to display the distance
and elevation.
Selects units to display the speed.
Enters the GPS alarm active range.
Selects the GPS alarm active range.
Selects the GPS information from the
internal GPS receiver that is output to
the [DATA] jack.
Displays the received GPS information.
Displays your position or other station's
positions.
Displays memorized positions, or turns
the GPS alarm function ON or OFF.
Turns the GPS logger function ON or
OFF, to store your route as you move.
Selects the GPS Logger function record
interval.
Turns ON the GPS logger function with
the transceiver in the Sleep mode.
Selects an operating mode to transmit
position data received from a GPS re-
ceiver.
Turns OFF the GPS TX function.
Transmits position data in selected GPS
sentences.
Enter a GPS message of the GPS TX
function.