Icom ID-31A Advanced Instructions page 198

Previous view
NOTE: The default settings, shown below, are for the USA version.
The default settings may differ, depending on the version.
Sounds
In this item, set the Sound options
Beep Level
Beep/Vol Level Link
Key-Touch Beep
Scan Stop Beep
Standby Beep
Scope AF Output
In this item, set the Time
Time Set
Date/Time
GPS Time Correct
UTC Offset
Auto Power OFF
SD Card* 2
In this item, set the microSD card options
Setting Load
Setting Save
SD Card Info
Format
Unmount
2
* Be sure to insert the microSD card into the transceiver before selecting these items.
.
RANGE OR VALUE (Default is shown in bold)
0~3~9
OFF or ON
OFF or ON
OFF or ON
OFF, ON or ON (to me:High Tone)
OFF or ON
options.
RANGE OR VALUE (Default is shown in bold)
OFF or Auto
–14:00~±0:00~+14:00
OFF, 30min, 60min, 90min or 120min
.
RANGE OR VALUE (Default is shown in bold)
File selection
ALL, Except My Station,
Repeater List Only
<<New File>>
File selection
MENU SCREEN OPERATION
Sets the beep output level.
Selects whether or not the beep output lev-
el can be adjusted by the [VOL] control.
Turns the confirmation beep tones when
key is pushed, ON or OFF.
Turns the scan stop beep ON or OFF.
Turns the standby beep function in the
DV mode ON or OFF.
Selects the audio output capability during
a sweep by the Band Scope function.
Sets the current date and time.
Selects if the time data is automatically
corrected by a received GPS sentence.
Enters the time difference between UTC
and the local time.
Turns the Auto power OFF function ON
or OFF.
Loads the settings file to the transceiv-
er.
Saves the settings as a new file.
Overwrites the settings to an existing
file.
Displays the free space and remaining
recording time of the card.
Formats the card.
Unmounts the card.
10-11
10
DESCRIPTIONS
DESCRIPTIONS
DESCRIPTIONS
10