Icom ID-31A Advanced Instructions page 185

Previous view
9
PRIORITY WATCH
DR MODE AND MEMORY CHANNEL (Continued)
■
When a signal is received.
• When "ON" is selected.
When a signal is received on the priority channel,
the memory mode is automatically selected. The
"PRIO" icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When "Bell" is selected.
When a signal is received on the priority channel,
a beep sounds and the "PRIO" icon blinks on the
screen.
Automatically changes to the memory channel mode.
Remains in the DR mode.
9-32
Blinks
Blinks