Dr Mode Operation Flow Chart; D About Sections 3 And - Icom ID-31A Advanced Instructions

Previous view
2
DR MODE <PREPARATION>

■ DR mode operation flow chart

1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
D About Sections 3 and 4
In sections 3 [DR mode <Basic>], and 4 [DR mode <Advance>], the following themes are described.
Convenient information and settings for using D-STAR
Click the title as shown below to jump to the detail page.
Registering your call sign
Programming your "MY" call sign
Selecting your "FROM" repeater
Selecting your "TO" repeater
Calling
Reply to a call
Other settings
Repeater list information
Repeater programming
Troubleshooting
To use a repeater gateway, you must register
your call sign with a gateway repeater, usually
one near your home location.
Ask your nearest repeater's administrator for
details.
Your own call sign must be programmed for both
digital voice and low-speed data communica-
tions, including GPS transmission.
For Local area calls or Gateway calls, select
your access repeater.
For Simplex calls, select a preset frequency.
NOTE: If the repeater has no Gateway call
sign, you cannot make a gateway call.
Select the destination repeater or the destina-
tion call sign.
For a Simplex call
For a Local area call
For a Gateway call
Push [PTT] to transmit.
®
are described on each item.
Describes how to quickly and easily reply to a call. (p.
3-4)
Describes convenient functions (pp. 4-10 to 4-18)
(e.g. Auto reply function, Speech function, Low-speed
data communication, and so on)
Describes the preset repeater list information (p.
4-39)
Describes how to program new repeater information
(pp. 4-21 to 4-28)
Describes troubleshooting in using D-STAR® (See
'TROUBLESHOOTING')
2-4
(p. 3-20)
(p. 3-2)
(p. 3-3)