Emr Communication - Icom ID-31A Advanced Instructions

Previous view

■ EMR communication

The EMR (Enhanced Monitor Receive) communication
mode can be used in only the DV mode. In the EMR
mode, no call sign setting is necessary. When an EMR
mode signal is received, the audio (voice) will be heard
at the specified level, even if the volume setting level is
set to the minimum level, or digital call sign/digital code
squelch is in use. (Default: OFF)
NOTE: The EMR communication function is auto-
matically turned OFF when the transceiver is turned
OFF.
Example: To transmit from "Hamacho430" repeater in
the EMR mode
Hold down
q
• The DR mode is selected.
Push D-pad( ) to select "FROM," and then push D-
w 
pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Repeater List," and then
e 
push D-pad(Ent).
Push D-pad( ) to select "11: Japan," and then push
r 
D-pad(Ent).
Push D-pad( ) to select "Hamacho430," and then
t 
push D-pad(Ent).
• "Hamacho430" is displayed on "FROM".
Push [MENU]
y
Push D-pad( ) to select the root item ("DV Set"),
u 
and then push D-pad(Ent).
Push D-pad( ) to select "EMR," and then push D-
i

pad(Ent).
Push D-pad( ) to select "ON."
o 
!0 Push [MENU]
• "EMR" appears.
!1 Push [PTT] to transmit.
• The TX/RX indicator lights red.
• "EMR" blinks on a station that receives the EMR sig-
nal. And the audio (voice) will be heard at the specified
level.
!2 Release [PTT] to receive.
!3 To cancel the EMR mode communication, select
"OFF" in step o, as described above, or turn OFF
the power.
for 1 second.
.
to exit the MENU screen.
DR MODE <ADVANCED>
4-7
4
Appears
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21