D Using <<Gps Logger Only>> Mode - Icom ID-31A Advanced Instructions

Uhf transceiver
Hide thumbs Also See for ID-31A:
Table of Contents

Advertisement

Previous view
D Using <<GPS Logger Only>> mode
You can use only the GPS logger function, with the
transceiver turned OFF, by using the exclusive "GPS
Logger Only" mode.
For example, when you are traveling and don't want
to use the transceiver for communication, but you do
want to use just a GPS logger, this mode is useful. In
the "GPS Logger Only" mode, the GPS Logger func-
tion is ON, but the transceiver function is disabled, until
you reboot the transceiver.
<<GPS Logger Only>> outline
1. Insert the microSD card.
( The microSD card is not available from Icom. Pur-
chase a card to meet your needs)
2. Turn ON the GPS receiver.
3. Turn ON the GPS Logger function.
4. Turn ON the <<GPS Logger Only>> mode.
(The <<GPS Logger Only>> mode starts.)
Push
.
q
Push D-pad(
) to select "<<GPS Logger Only>>,"
w
then push D-pad(Ent).
D-pad
(Ent)
(�)
• After the "Only GPS Logger is now functioning"
message appears, then the GPS position is dis-
played to start the GPS Logger Only mode.
Also you can select the <<GPS Logger Only>>
mode in the GPS Menu. (p. 10-30)
(MENU > GPS > GPS LOGGER > <<GPS Logger Only>>)
To cancel the <<GPS Logger Only>> mode, re-
boot the transceiver by turning it OFF and then
ON again.
• When the transceiver is tuned ON, the normal
GPS Logger restarts.
If the GPS Logger is set to OFF when step w above
is performed, the confirmation screen " 'GPS Log-
ger' will be set to ON. OK?" appears.
Push D-pad() to se-
lect "YES," and push D-
pad(Ent) to turn the GPS
Logger function ON.
While GPS indicator
stays ON
Compass
direction top
is North
Your course
heading is
192 degrees
GPS LOGGER ONLY screen
The GPS Information, Grid Locator Display or Com-
pass Direction settings can be changed.
In the <<GPS Logger Only>> mode, push
open the Sub Menu as
shown to the right.
Then push D-pad() to
select a desired item, and
push D-pad(Ent) to enter.
5-29
GPS/GPS-A OPERATION
While a microSD
card is inserted
select
"<<GPS Logger Only>>"
Latitude
Longitude
Altitude
Speed
5
5
to

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Id-31e

Table of Contents