Previous view
3
DR MODE <BASIC>
"TO" (Destination) setting (Continued)
■
D "TO" (Destination) setting using the TX History
The TX History stores the name and/or call sign of
up to 20 "TO" (Destination) settings which were used
when you made the calls.
NOTE: If you never transmit a call in the DV mode,
you cannot select "TO" (destination) from the TX
History.
Example: Select the "Hirano430" repeater in the TX
History.
Hold down
q
• The DR mode is selected.
Push D-pad(
) to select "TO," and then push D-
w
pad(Ent).
D-pad
(Ent)
(�)
Push D-pad(
) to select "TX History," and then push
e
D-pad(Ent).
Push D-pad(
) to select "Hirano430," and then push
r
D-pad(Ent).
• "Hirano430" is displayed on "TO."
Information
✓
You can add the TX HISTORY data to the repeater list
or "Your Call Sign" memory, or delete if from there.
Push
on the TX HISTORY screen, then push
➥
D-pad(
) to select the desired item. And then push
D-pad(Ent).
for 1 second.
The
Sub
name
is
displayed
when
a
repeater is
selected.
"Hirano430" setting is completed.
3-16
The call sign
of the select-
ed repeater
is displayed.