Icom ID-31A Advanced Instructions page 194

Previous view
NOTE: The default settings, shown below, are for the USA version.
The default settings may differ, depending on the version.
DV Set
In this item, set
Tone Control
Auto Reply
DV Data TX
Digital Monitor
Digital Repeater Set
RX Call Sign Write
RX Repeater Write
DV Auto Detect
RX Record (RPT)
BK
EMR
EMR AF Level
infrequently changed values or functions in the DV mode.
RANGE OR VALUE (Default is shown in bold)
Cut, Normal or Boost
RX Bass
RX Treble Cut, Normal or Boost
RX Bass Boost OFF or ON
TX Bass Cut, Normal or Boost
TX Treble Cut, Normal or Boost
OFF, ON or Voice
PTT or Auto
Auto, Digital or Analog
OFF or ON
OFF or Auto
OFF or Auto
OFF or ON
ALL or Latest Only
OFF or ON
OFF or ON
0~19~39
10-7
MENU SCREEN OPERATION
DESCRIPTIONS
Sets the DV mode received audio bass filter
level to Cut, Normal or Boost.
Sets the DV mode received audio treble filter
level to Cut, Normal or Boost.
Turns the DV mode received audio Bass
Boost function ON or OFF
Sets the DV mode transmit audio bass filter
level to Cut, Normal or Boost.
Sets the DV mode transmit audio treble filter
level to Cut, Normal or Boost.
Selects the Automatic Reply function ON,
OFF or Voice.
Selects manually or automatically to transmit
low speed data.
Selects the DV mode RX monitoring when
[SQL] is held down.
Turns the digital repeater setting function ON
or OFF.
Turns the RX call sign automatic write func-
tion ON or OFF.
Turns the repeater call sign automatic write
function ON or OFF.
Turns the DV mode automatic detect func-
tion ON or OFF.
The transceiver can record the data of up to
40 individual calls. When you receive a call that
the destination station did not reply to, or one in
which the link repeater was not found, you can
record all of them or only the latest one, in the
Received Call Record.
Turns the BK (Break-in) function ON or OFF.
The BK function allows you to break into a
conversation where the two original stations
are communicating with call sign squelch
enabled.
Turns the EMR (Enhanced Monitor Receive)
communication mode ON or OFF. The EMR
mode can be used in the DV mode and no
call sign setting is necessary. When an EMR
mode signal is received, the audio (voice)
will be heard at the specified level even the
volume setting level is set to minimum level,
or digital call sign/digital code squelch is
turned ON.
Sets the audio output level when an EMR
mode signal is received.
10
10