Vfo Frequency And Call Channel - Icom ID-31A Advanced Instructions

Previous view

■ VFO FREQUENCY AND CALL CHANNEL

Checks the selected Call channel (priority channel),
while receiving on a VFO frequency.
Push [V/MHz]
q
Rotate [DIAL] to set the receive frequency.
w
Push [M/CALL]
e
mode.
Rotate [DIAL] to select the Call channel you want
r
to watch.
Push .
t
Push D-pad( ) to select "PRIO Watch," and then
y
push D-pad(Ent).
• ON : When a signal is received on the pri-
ority channel, the Call channel mode
is automatically selected. The "PRIO"
icon blinks on the screen.
• Bell : When a signal is received on the prior-
ity channel, the "
VFO mode.
D-pad
(Ent)
(�)
Push D-pad( ) to select "ON" or "Bell," and then
u
push D-pad(Ent).
• The "PRIO" icon appears and the priority scan
starts.
• To cancel the scan, push [CLR]
to select the VFO mode.
to select the Call channel
" icon blinks in the
.
[DIAL]
Example: Checks Call channel "C0" every 5 seconds,
while receiving on 431.860 MHz.
Appears
9-7
PRIORITY WATCH
Push [M/CALL] .
Push .
Appears
Checks the Call chan-
nel every 5 seconds.
(Continued on page 9-8.)
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21