Ur" (Destination Call Sign) Programming Using The Rx History - Icom ID-31A Advanced Instructions

Previous view
■ "UR" (Destination call sign) programming using the RX History
A destination call sign must be programmed to a spe-
cific individual station or a repeater, for both digital
voice and low-speed data communications.
Up to 200 call signs can be stored.
• RX History
When a call is received in the DV mode, the calling sta-
tion and repeater call signs being used can be stored in
the received call record. Up to 40 calls can be stored.
Example: Programming "JM1ZLK" and "TOM" into
Your Memory using the RX History.
Hold down for 1 second.
q
• The RX HISTORY screen is displayed.
Push D-pad( ) to select "RX01."
w 
Push to display CALLER/CALLED, and then
e
push .
Push D-pad( ) to select "Add To Your Memory."
r 
Push D-pad(Ent).
t
Push D-pad( ) to select "JM1ZLK," and then push
y 
D-pad(Ent).
The display changes to the YOUR
CALL SIGN EDIT screen.
3-5
DR MODE <BASIC>
RX HISTORY screen
is displayed
This screen shows you re-
ceive the signal that "JM-
1ZLK" send to "JG3LUK."
☞ Continued on the next page.
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21