Vfo Scan And Call Channel - Icom ID-31A Advanced Instructions

Previous view

■ VFO SCAN AND CALL CHANNEL

Checks the selected Call channel (priority channel),
during a VFO scan.
Push [M/CALL]
q
mode.
Rotate [DIAL] to select the Call channel you want
w
to watch.
Push [V/MHz]
e
Push [FM/DV]
r
Hold down [SCAN]
t
Push D-pad( ) to select the scan type, and then
y
push D-pad(Ent) to start the VFO scan (p. 8-4).
D-pad
(Ent)
(�)
Push .
u
Push D-pad( ) to select "PRIO Watch," and then
i
push D-pad(Ent).
• ON : When a signal is received on the prior-
ity channel, the Call channel mode is
automatically selected.
• Bell : When a signal is received on the prior-
ity channel, the "
in the VFO mode.
Push D-pad( ) to select "ON" or "Bell," and then
o
push D-pad(Ent).
• The "PRIO" icon is displayed and the priority scan
starts.
• Regardless of the scan setting, when a signal is re-
ceived during the scan, the transceiver continues to
check the Call channel every 5 seconds.
• Push [CLR]
scan.
to select the Call channel
to select the VFO mode.
to select the receive mode.
for 1 second.
" icon is displayed
to cancel the priority scan and VFO
[DIAL]
Example: Checks Call channel "C0" every 5 seconds,
during a VFO scan.
Appears
Blinks
Blinks
9-13
PRIORITY WATCH
Hold down [SCAN]
for 1 second.
Push .
Blinks
Blinks
Appears
Checks the Call chan-
nel every 5 seconds.
(Continued on page 9-14.)
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21