Icom ID-31A Advanced Instructions page 23

Previous view
3
DR MODE <BASIC>
"UR" (Destination call sign) programming (Continued)
■
Push D-pad( ) to select "NAME," and then push D-
u 
pad(Ent).
Rotate [DIAL] to select a desired character.
i
(For example: T)
• The selected character blinks.
• Push D-pad() to move the cursor right or left.
• While selecting a character, push
character to a upper case or lower case letter.
• While selecting a digit, push
selection window.
• A space can be selected, even for any input mode se-
lected.
• Push [CLR] to erase the selected character, or hold
down [CLR]
after the cursor.
• See page 4-2 for programming details.
Push D-pad( ") to move the cursor to the second
o
digit.
!0 Repeat steps i and o to enter a name of up to 16
characters, including spaces.
(For example: First, T, then O, then M.)
!1 After entering the name, push D-pad(Ent).
!2 Push D-pad( ) to select "<<Add Write>>," and then

push D-pad(Ent).
!3 Push D-pad( ) to select "YES," and then push D-

pad(Ent).
!4 Push [MENU]
screen.
to change the
to open the input mode
to continuously erase the characters
to exit the [RX HISTORY]
[DIAL]
"TOM" setting is completed.
When "TOM" is selected,
"JM1ZLK" is displayed.
3-6
[JM1ZLK] is auto-
matically set
"TOM/JM1ZLK" is
programmed into
the UR call sign
memory.