Copying With Programmed Copy Settings (Mode Memory) - Konica Minolta bizhub C451 Copy Operations

5
5.5

Copying with programmed copy settings (Mode Memory)

Programmed copy settings can be recalled to be used again for copying.
1
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the document" on page 4-8.
2
Press the [Mode Memory] key.
The Recall Copy Program screen appears.
3
Touch the button for the copy program registered with the copy settings to be recalled.
– If the copy settings in the selected copy program are not to be checked, continue with step 8.
– If the copy program to be recalled is not displayed, touch
program is displayed.
4
Press the [Check Program Settings] key.
– The copy settings cannot be changed from the Check Job Settings screens.
The Check Job Settings screen appears.
There are six Check Job Settings screens. The number to the right of the screen title indicates the
number of the currently displayed screen.
To display the previous screen, touch [
If the setting for a function has been changed from the default, the button for that function appears with
a colored frame.
5-12
and
Back]. To display the next screen, touch [Forward
Additional copy operations
until the desired copy
].
bizhub C451/C550/C650