3
To change scan settings for each document
When copying using the "Separate Scan" setting or when multi-page docu-
ments are placed on the original glass, the scan settings can be changed for
each document. The following procedure describes how to change the set-
tings when the "Separate Scan" setting is used.
1
Position the document to be copied.
2
In the Basic screen, touch [Separate Scan].
3
Press the [Start] key.
Scanning begins.
4
Touch [Change Setting].
A screen appears, allowing you to change the settings.
5
Touch the key of the setting to be changed, select the desired setting,
and then touch [OK].
–
The buttons that appear in the Change Setting screen differ de-
pending on the specified settings. Settings for the following can be
changed.
Simplex/Duplex, Bind, Zoom, Frame Erase, Center Erase, Original
Size
3-26
Basic copy operations
C250