Pci Board - NEC N8100-2836F User Manual

Chapter 2 Preparations
1.14

PCI board

The device is equipped with "Riser Cards (3 types)" to which a PCI board can be fit, "LOM Card dedicated Slot"
to which an LOM Card can be fit, and "RAID Controller dedicated Slot" to which a RAID controller can be fit. 8
full-height PCI boards can be fit to riser card, one LOM card can be fitted to LOM Card dedicated Slot, and one
RAID Controller can be fit to RAID Controller dedicated Slot. (In total, 10 PCI boards can be installed.) Before
installing an option, prepare the followings.
All slots support full-height PCI cards. Use the PCI card length according to the table below.
・Primary riser connector
Slot
1 Full-length/Full-height (FL/FH)
2 Half-length/Full-height (HL/FH)
3 Half-length/Full-height (HL/FH)
*: This server is shipped with the card is equipped on the primary riser card and connected to the connector of
the body.
・Secondary riser connector
Slot
4 Full-length/Full-height (FL/FH)
5 Half-length/Full-height (HL/FH)
6 Half-length/Full-height (HL/FH)
・Tertiary riser connector
Slot
7 Full-length/Full-height (FL/FH)
8 Half-length/Full-height (HL/FH)
Slot description example
Slot2 PCIe3 x16 (4,2,1)
Important To avoid static electricity, see Chapter 1 (1.8 Anti-static Measures) in Safety
Precautions and Regulatory Notices. Ask your sales representative if you
want to remove the TPM kit.
Note In order to prevent the damage to server's main body or the expansion board,
please remove all the AC power cables before removing/installing riser card.
PCIe type
PCIe type
PCIe type
Negotiable link width(s)
Physical connector link width
Gen3 signaling rate
Slot number
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
3 slots riser*
PCIe3 x16 (8,4,2,1)
PCIe3 x16 (8,4,2,1)
PCIe3 x8 (8,4,2,1)
3 slots riser
PCIe3 x16 (16,8,4,2,1)
PCIe3 x16 (16,8,4,2,1)
PCIe3 x8 (8,4,2,1)
2 slots riser
PCIe3 x16 (16,8,4,2,1)
PCIe3 x16 (16,8,4,2,1)
2 slots riser
－
PCIe3 x16 (16,8,4,2,1)
PCIe3 x8 (8,4,2,1)
101