Table of Contents
Advertisement
Chapter 2 Preparations
1.12
PCI board
There are 3 places for installing a PCI board. 1 slot dedicated for the LOM card, 1 slot dedicated for the RAID
controller, and 1 slot for AROC. The riser card supports 1 full height PCI board, 2 low profile PCI boards, 1 one
LOM card in the slot dedicated to the LOM card, and 1 RAID controller in the slot dedicated to the RAID controller.
(A total of 5 PCI boards can be mounted).
Notes
Read the following notes when installing or removing a PCI card.
Do not touch the terminals of the riser cards and the leads of electronic components with your bare hand.
Fingerprints and dust left on them cause the server to malfunction due to a connection failure or damage to
the leads.
Available type of PCI card depends on a riser card. Make sure the card type before connecting it to riser
card.
Supported PCI cards and available slots
The following tables list supported cards and slots available for them. For details of the features of each
card, see the manual supplied with the card.
98
Important
You must avoid static electricity to work with the procedure below. For
details, see Chapter 1 (1.8 Anti-static Measures) in Safety Precautions and
Regulatory Notices.
Tips
If the operation performance of PCI card differs from that of PCI Slot, the PCI card
operates at lower frequency.
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
