Using Remote Management Console - NEC 140He User Manual

Java2 Runtime Environment
Java2 Runtime Environment, Standard Edition 1.4.2_04 or later, which you can download from the following, is
required.
http://java.sun.com/j2se/
If you access the login page without installing the product mentioned above, you may see a dialog box for security
warning. Read the message and take actions according to the message.

Using Remote Management Console

Overview
You can control power-on/off of a server and use Remote KVM Console from a web browser by using the web server
functions of BMC.
This function is achieved through Java Applet.
Connecting to the Web Server from a Web Browser on the Management PC
Access the following URL from the web browser in the management PC.
URL: http://BMC_HostPort/index.htm
NOTES:
"BMC_HostPort" is a colon and port number added after the BMC address or host name.
If the http port number is 80h (default), you can skip the port number.
When you use DHCP functions as well as performing auto registration to the DNS
server, the BMC default name is "ARMC"+MAC Address.
There is the MAC address on the Management Main Card.
If you want to use the Remote Management Function with DHCP disabled, first use the
default IP address "192.168.1.1" and make access in a local network where this IP
address is available, and then adjust configurations such as IP address according to your
network environment. For information on configuration, see "BMC Configuration"
described later in this section.
IP address: 192.168.1.1
User name: Administrator
Password : (none)
Host name: ARMC00004C9FXXXX
Default host name
4-51