Using Remote Management Console - NEC N8100-1220F User Manual

Using Remote Management Console

Overview
You can control power-on/off of a server and use Remote KVM Console from a web browser by
using the web server functions of BMC.
This function is achieved through Java Applet.
Connecting to the Web Server from a Web Browser on the Management PC
Access the following URL from the web browser in the management PC.
URL: http://BMC_HostPort/index.htm
NOTES:
"BMC_HostPort" is a colon and port number added after the BMC
address or host name.
If the http port number is 80h (default), you can skip a port number.
When you use DHCP functions as well as performing auto
registration to the DNS server, the BMC default name is
"ARMC"+MAC Address.
There is the MAC address on the Management Main Card.
IP address: 192.168.1.1
User name: Administrator
Password : (none)
Host name: ARMC00004C9FXXXX
If you want to use the Remote Management Function with DHCP
disabled, first use the default IP address "192.168.1.1" and make
access in a local network where this IP address is available, and then
adjust configurations such as IP address according to your network
environment. For information on configuration, see "BMC
Configuration" described later in this section.
Configuring Your Server 4-93
Default host name