Maxicode Data - Toshiba B-SX4T Series Specification

(12) MaxiCode data

For mode 2 or 3:
[ESC] RBaa; bbbbbbbbbcccdddeeeee --- eeeee [LF] [NUL]
For mode 4 or 6:
[ESC] RBaa; fffffffffggggg --- ggggg [LF] [NUL]
bbbbbbbbb:
• Mode 2:
b1b2b3b4b5:
b6b7b8b9:
• Mode 3:
b1b2b3b4b5b6: Zip code
b7b8b9:
ccc:
ddd:
eee --- eee:
fffffffff:
ggg --- ggg:
NOTES: 1. When anything other than numerics is included in the data string of zip
code (mode 2), zip code extension, class of service, or country code, a
MaxiCode is not drawn.
2. If the message data is less than 84 digits when mode 2 or 3 is selected,
the printer adds a CR (000000) at the end of the data, and the remaining
digits will be padded with FSs (011100).
exceeding 84 digits is received, the excess data will be discarded before
drawing a MaxiCode.
3. If the message data is less than 93 digits (9 digits + 84 digits) when
mode 4 or 6 is selected, the printer adds a CR (000000) at the end of the
data, and the remaining digits will be padded with FSs (011100). When
message data exceeding 93 digits is received, the excess data will be
discarded before drawing a MaxiCode.
4. Mode 6 should not be used for usual operation since it is used for
scanner programming.
5. When "TYPE2: Special specification" is set for MaxiCode specification
setting in the system mode and when Mode 2 is selected, the country
code must be 840. Otherwise, a MaxiCode will not be printed.
6. When "TYPE2: Special specification" is set for MaxiCode specification
setting in the system mode and when Mode 3 is selected, the country
code must be other than 840.
printed.
Postal code
Zip code
Zip code extension Fixed as 4 digits (Numerics)
Vacant
Class of service
Country code
Message data strings
Primary message data strings
Secondary message data strings
- 160 -
Fixed as 9 digits
Fixed as 5 digits (Numerics)
Fixed as 6 digits (Character "A" of
code set)
Fixed as 3 digits (20H)
Fixed as 3 digits (Numerics)
Fixed as 3 digits (Numerics)
84 digits
9 digits
84 digits
When message data
Otherwise, a MaxiCode will not be