Download  Print this page

Toshiba B-SX4T Series Specification Page 174

B-sx4t series, b-sx5t series external equipment interface specification.
Hide thumbs

Advertisement

[C: Batch mode (Cut interval: 1, Issue count: 2)]
• "Automatic forward feed standby" is set to ON in the system mode.
• The rotary cutter is used.
Cut position
Head position
A
A
B
A
B
B
B
B
(1) Idling (during the forward feed standby)
(2) Feeds back to the home position.
(3) Completes printing the 1st label (A).
(4) Starts printing the 2nd label (B).
(5) The 1st label (A) reaches the cut position
and is cut.
(6) Completes printing the 2nd label (B).
(7) Feeds the 2nd label (B) to the cut position.
(8) The 2nd label (B) reaches the cut position
and is cut.
(9) Since non-stop cutting is performed, paper
is fed and stopped over the cut position.
(10) Feeds back to the home position.
(11) After 1 second, performs 13.7-mm
automatic forward feed.
- 170 -

Advertisement

Table of Contents

   Related Manuals for Toshiba B-SX4T Series

Comments to this Manuals

Symbols: 0
Latest comments: