Toshiba B-SX4T Series Specification page 176

B-sx4t series, b-sx5t series external equipment interface specification
Hide thumbs Also See for B-SX4T Series:
Table of Contents

Advertisement

[E: Strip mode (Issue mode: E)]
The expansion I/O is installed:
The strip sensor is ignored. An issue is performed by checking a PAUSE
signal generated from the expansion I/O.
Strip position
Head position
A
B
C
(1) Idling
The PAUSE signal generated from the expansion
I/O, is turned ON.
(2) The PAUSE signal generated from the expansion
I/O, is turned OFF.
Feeds back to the home position.
(3) Completes printing the 1st label (A).
The PAUSE signal generated from the expansion
I/O, is turned ON.
(4) Remove the 1st label (A).
The PAUSE signal generated from the expansion
I/O, is turned OFF.
(5) Feeds back to the home position.
(6) Completes printing the 2nd label (B).
The PAUSE signal generated from the expansion
I/O, is turned ON.
(7) Remove the 2nd label (B).
The PAUSE signal generated from the expansion
I/O, is turned OFF.
(8) Feeds back to the home position.
(9) Completes printing the 3rd label (C).
The PAUSE signal generated from the expansion
I/O, is turned ON.
* When the PAUSE signal generated from the expansion
I/O is on, a label is not printed.
- 172 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents