Download  Print this page

Toshiba B-SX4T Series Specification Page 219

B-sx4t series, b-sx5t series external equipment interface specification.
Hide thumbs

Advertisement

Notes
(1)
(2)
(3)
(4)
[Effective print area]
Model
Issue mode
Item
Effective print width
Min.
Max.
Effective print
length
Label Min.
Max.
Tag
Min.
Max. 1498.0
NOTE 1: The use of the rotary cutter at 10 ips is not supported for the B-SX4T.
The print origin of coordinates must be set so that the result of drawing the
graphic data will be within the effective print area set by the Label Size Set
Command ([ESC] D).
The number of graphic width dots and the number of graphic height dots must
also be set so that the result of drawing the graphic data will be within the effective
print area set by the Label Size Set Command ([ESC] D) in the same manner as
the above.
Both width and height are 8 dots/mm and 12 dots/mm for the B-SX4T and the B-
SX5T, respectively.
The actual result of drawing may deviate within ±0.5 mm and ±0.33 mm for the B-
SX4T and the B-SX5T, respectively, in the X direction with respect to the
designated print origin of the X-coordinate.
To draw the received graphic data at high speed, the data is directly
developed in the image buffer without applying correction to each bit with
respect to the designated X-coordinate. Consequently, an error of up to 4
bits occurs.
B-SX4T
Swing
Batch
Strip
cutter
10.0
104.0
6.0
21.4
23.0
1496.0
8.0
23.4
Cut
Rotary cutter
Head-up
Head-up
Batch
operation
operation
not
performed
performed
3 ips:
3 ips:
79.0
30.0
6 ips:
6 ips:
6.0
91.0
30.0
10 ips: –
10 ips: –
(NOTE 1)
(NOTE 1)
1492.0
3 ips: 28.0
6 ips: 28.0
8.0
10 ips: – (NOTE 1)
1498.0
1498.0
- 215 -
B-SX5T
Swing
Head-up
Strip
cutter
operation
performed
10.0
128.0
3 ips:
21.4
23.0
5 ips:
8 ips:
1496.0
1492.0
3 ips: 28.0
23.4
5 ips: 28.0
8 ips: 36.0
1498.0
[mm]
Cut
Rotary cutter
Head-up
operation
not
performed
3 ips:
79.0
23.0
5 ips:
87.0
23.0
8 ips:
98.0
23.0

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: