Download  Print this page

Ata Card Writable Character Information Acquire Command - Toshiba B-SX4T Series Specification

B-sx4t series, b-sx5t series external equipment interface specification.
Hide thumbs

Advertisement

6.3.37 ATA CARD WRITABLE CHARACTER INFORMATION ACQUIRE COMMAND

Function
Sends the writable character information stored in the ATA card to the host.
Format
[ESC] WG; a, bb, cc [LF] [NUL]
Term
a:
bb:
cc:
Explanation
(1) The format of information to be returned to the host is as follows:
SOH STX
01H
When the ATA card is not inserted in a specified slot, "00H" is returned for all
information from "Writable Character Set" to "Storage" (5 bytes).
Example
When the following information in the ATA card in Slot 1 is acquired:
Writable character set 44, writable character code 41H
[ESC] WG; 1, 44, (0x00) (0x41) [LF} [NUL]
* (0x00) represents data of 00H.
* (0x41) represents data of 41H.
Drive
1: Slot 1 ATA card
2: Slot 2 ATA card
Writable character set
01 to 44, 51 to 55
Writable character code
If there is a 1-byte writable character, "00H" should be attached to the top of the
data to make it 2 bytes.
Writable
"D"
Slot
character set
02H
44H
3xH
3xH
Slot
Character
Storage
code
3xH
xxH
xxH
"0"/"1"
Character code (to be described in 2 bytes)
If there is 1-byte writable character, "00H"
is attached to the top of the data.
Writable character set
"01" (30H, 31H) to "44" (34H, 34H)
"51" (35H, 31H) to "55" (35H, 35H)
"1" (31H): Slot 1
"2" (32H): Slot 2
- 232 -
[ESC] WG
ETX EOT
CR
LF
03H
04H
0DH 0AH
Storage of writable character
"0": Not stored
"1": Stored

Advertisement

Table of Contents

   Related Manuals for Toshiba B-SX4T Series

Comments to this Manuals

Symbols: 0
Latest comments: