Download  Print this page

Toshiba B-SX4T Series Specification Page 172

B-sx4t series, b-sx5t series external equipment interface specification.
Hide thumbs

Advertisement

[C: Batch mode (Cut interval: 1, Issue count: 2)]
• "Automatic forward feed standby" is set to ON in the system mode.
• The swing cutter is used.
Cut position
Head position
A
A
A
B
B
B
(1) Idling (during the forward feed standby)
(2) Feeds back to the home position.
(3) Completes printing the 1st label (A).
(4) Feeds the 1st label (A) to the cut position.
(5) Cuts the 1st label (A).
(6) Feeds back to the home position.
(7) Completes printing the 2nd label (B).
(8) Feeds the 2nd label (B) to the cut position.
(9) Cuts the 2nd label (B).
(10) Feeds back to the home position.
(11) After 1 second, performs 13.7-mm
automatic forward feed.
- 168 -

Advertisement

Table of Contents

   Related Manuals for Toshiba B-SX4T Series

Comments to this Manuals

Symbols: 0
Latest comments: