Toshiba B-SX4T Series Specification page 173

[C: Batch mode (Cut interval: 1, Issue count: 2)]
• "Automatic forward feed standby" is set to OFF in the system mode.
• The rotary cutter is used.
Cut position Head position
A
A B
B
A
B
B
B
(1) Idling (at the home position)
(2) Completes printing the 1st label (A).
(3) Starts printing the 2nd label (B).
(4) The 1st label (A) reaches the cut position
and is cut.
(5) Completes printing the 2nd label (B).
(6) Feeds the 2nd label (B) to the cut position.
(7) The 2nd label (B) reaches the cut position
and is cut.
(8) Since non-stop cutting is performed, paper
is fed and stopped over the cut position.
(9) Feeds back to the home position.
- 169 -