Download  Print this page

Toshiba B-SX4T Series Specification Page 177

B-sx4t series, b-sx5t series external equipment interface specification.
Hide thumbs

Advertisement

The expansion I/O is not installed:
The strip sensor is ignored, an issue is performed.
Strip position
Head position
A
B
C
*1
Issue mode E is different from issue mode D. In issue mode E, a label is
issued regardless of whether or not a label to be stripped is placed.
*2
The peripheral device such as an applicator, must control the PAUSE
signal generated from the expansion I/O.
*3
If the issue count is set to 2 or more to issue labels when the expansion I/O
has been installed, the printer issues the specified number of labels while
the PAUSE signal generated from the expansion I/O is off.
*4
If the issue count is set to 2 or more to issue labels when the expansion I/O
has not been installed, the specified number of labels is issued.
(1) Idling
(2) Feeds back to the home position.
(3) Completes printing the 1st label (A).
(4) Feeds back to the home position.
(5) Completes printing the 2nd label (B).
(6) Feeds back to the home position.
(7) Completes printing the 3rd label (C).
* The next label is printed regardless of whether
or not the label is removed.
- 173 -

Advertisement

Table of Contents

   Related Manuals for Toshiba B-SX4T Series

Comments to this Manuals

Symbols: 0
Latest comments: