[C: Batch (Cut)]
• "Automatic forward feed standby" is set to ON in the system mode.
• The rotary cutter is used.
Cut position
Head position
[D: Strip]
Strip position
Head position
(1) Place paper.
(2) Completes a feed.
(Completes feeding to the top of paper.)
(3) Feeds to the cut position.
(4) Cuts unnecessary paper.
(5) Since non-stop cutting is performed, paper is
fed and stopped over the cut position.
(6) Feeds back to the home position.
(7) After 1 second, performs 13.7-mm automatic
forward feed.
(1) Place paper.
(2) Feeds back to the home position.
(3) Starts a feed.
(4) Completes a feed.
(Completes feeding to the top of form and stops)
* Even if a label is not removed, a feed is
performed.
- 183 -