Supplemental explanation of parameter "I"
When Gen2 tag is used, options for the parameter "I" are as follows:
I1: TID & User area data
I2: EPC data
I3: EPC data + TID & User area data
As the readability of the TID & User area differs depending on the tag manufacturers,
refer to the memory map of each tag.
• In the case of OMRON's Gen2 tag
4-byte TID area is readable, and the user area is read/write protected.
• In the case of HITACHI's Gen2 tag (Hibiki)
8-byte TID area is readable/writable and 30-byte user area is readable/writable.
(4) The format of information to be returned to the host is as follows.
Start of the status block
30H30H: Reading failed.
32H31H: EPC Class 0
32H32H: EPC Class 1
32H34H: EPC Class 1 Generation 2
Tag data (0 bytes to 9999 bytes)
End of the status block
- 252 -