Ip Address Set Command - Toshiba B-SX4T Series Specification

6.3.39 IP ADDRESS SET COMMAND

Function Sets the IP address to be required for the network connection.
Format [ESC] IP; a, bbb, ccc, ddd, eee [LF] [NUL]
Term a:
bbb: First 8 bits:
ccc: Second 8 bits: 000 to 255
ddd: Third 8 bits:
eee: Last 8 bits:
Explanation The IP address setting can also be made in the system mode. The setting which was
last made takes effect.
Example Sets the printer IP address to "157.69.9.78".
[ESC] IP; 2, 157, 069, 009, 078 [LF] [NUL]
Function Enables or disables the socket communication, and sets the communication port
number to be used.
Format [ESC] IS; a, bbbbb [LF] [NUL]
Term a:
bbbbb:
Explanation These settings can also be made in the system mode. The setting which was last
made takes effect.
Example To enable the socket communication and set the port number to "8000".
[ESC] IS; 1, 08000 [LF] [NUL]
IP address to be set
2: Printer IP address
3: Gateway IP address (Initial value: 0.0.0.0)
4: Subnet mask
000 to 255
000 to 255
000 to 255
0: Socket communication is disabled.
1: Socket communication is enabled.
Port number (It must be set in 5 digits.)
00000 to 65535
(Initial value: 192.168.10.20)
(Initial value: 255.255.255.0)
- 234 -
[ESC] IP