Download  Print this page

Toshiba B-SX4T Series Specification Page 129

B-sx4t series, b-sx5t series external equipment interface specification.
Hide thumbs


[GS1 DataBar Limited]
[GS1 DataBar Expanded]
When the bar code height is 0000, bar code (including guard bars) and numerals
under bars are not drawn. However, the bar code printed on the previous label is
Length of guard bar
The length of guard bar is valid only when the type of bar code is WPC.
It is ignored in all other cases.
Numerals under bars
Numerals are/are not provided under bars according to the parameter for
print/non print of numerals under bars. The contents of numerals under bars to
be printed vary according to the type of bar code. The character set of numerals
under bars is OCR-B. Such numerals are enlarged or reduced only horizontally
according to the width of the bar code. They are drawn vertically in the fixed one
[Drawing positions of numerals under bars]
In the case of JAN and EAN
(Example) EAN13 + 2 digits
(Example) EAN8
Height of bar code
Length of guard bar
- 125 -


Table of Contents

   Related Manuals for Toshiba B-SX4T Series

Comments to this Manuals

Symbols: 0
Latest comments: