C: Stored PC command save file
In the following cases, 1 byte of "00H" is returned as the stored PC command save
(2) This command is one of the command types that are processed as they are
received. Processing takes place starting from the ones received first. Until the
process of the command previously sent is completed, this command is not
processed. Therefore, if the printer is not in the idle state when this command is
sent, the information data may not be returned immediately.
(1) This command is effective only for the serial interface (RS-232C).
Stored PC command save file name
File name 1 00H File name 2 00H ··· File name n
"1" (31H): Slot 1
"2" (32H): Slot 2
There is no file.
The ATA card has not been inserted in the specified slot.
- 231 -
File name (including extension):
"00H" should be placed between file