Position Fine Adjust Command - Toshiba B-SX4T Series Specification

6.3.2

POSITION FINE ADJUST COMMAND

Function Adjusts the feed value so that the label will be shifted forward or backward from the
automatically set first print start position.
Adjusts the cut position so that the label will be cut at a position shifted forward or
backward from the automatically set cut position, or adjusts the strip position so that
the label will be shifted forward or backward from the automatically set strip position.
Adjusts the value for feeding the label back to the home position after cutting, or
adjusts the value for feeding the label back to the home position after stripping.
Format [ESC] AX; abbb, cddd, eff [LF] [NUL]
Term a:
bbb:
c:
ddd:
e:
ff:
Indicates the direction, forward or backward, in which a fine adjustment is to
be made.
+: Backward
-: Forward
Feed value to be finely adjusted.
000 to 500 (in 0.1 mm units)
Indicates the direction, forward or backward, in which a cut position
(or strip position) fine adjustment is to be made.
+: Backward
-: Forward
Fine adjustment value for the cut position (or strip position).
000 to 500 (in 0.1 mm units)
Indicates whether the back feed is to be increased or decreased.
+: Increase
-: Decrease
Back feed length fine adjustment value
00 to 99 (in 0.1 mm units)
- 43 -
[ESC] AX