5. SYSTEM MODE
Example of TYPE2
「Case 1」
Issuing number = 5, When label end is detected at 3
(1) (2) (3)
「Case 2」
Issuing number = 5, When label end is detected at 3
than 30 mm.
(1) (2) (3)
「Case 3」
Issuing number = 5, When label end is detected at 3
than 30 mm.
(1) (2) (3)
5.4.2.15 MaxiCode specification / MAXI CODE
TYPE1
・
TYPE2
・
The mode specified by the command may be different from the actual mode, depending on the status
of
this
parameter.
For details, refer to the External Equipment Interface Specification (EAA-03466).
5.4.2.16 XML
Disable / OFF
・
Standard / STD
・
Oracle / ORACLE
・
SAP
・
Standard external / STD EXT
・
Oracle external / ORACLE EXT
・
・
SAP external / SAP EXT
↑
Stop by error after (3), LCD: "NO PAPER 2"
When printer is restarted, issue (4) (5) after initial feed.
The complete issued label is (1) (2) (3) (4) (5).
↑
Stop printing after 20mm printing as error, LCD: "NO RIBBON 2"
When printer is restarted, issue (4) (5) after initial feed.
The complete issued label is (1) (2) (4) (5).
↑
Stop printing after issuing (3) as error, LCD: "NO RIBBON 2"
When printer is restarted, issue (4) (5) after initial feed.
The complete issued label is (1) (2) (3) (4) (5).
Compatible with the current version
Special specification
Also,
rd
label issuing.
rd
label issuing. The remaining label length is longer
rd
label issuing. The remaining label length is shorter
the
data
transmission
Disable XML function
Standard specification
Specification for Oracle
Specification for SAP
Standard specification (Use external memory)
Specification for Oracle (Use external memory)
Specification for SAP (Use external memory)
5-32
EO18-33027
5.4 PARAMETER SETTING
method
differs
partly.