Receive Buffer Free Space Request Command - Toshiba B-SX4T Series Specification

6.3.34 RECEIVE BUFFER FREE SPACE STATUS REQUEST COMMAND
Function Sends information on the printer status and the free space of the receive buffer to the
host.
Format [ESC] WB [LF] [NUL]
Explanation (1)
Notes (1)
(2)
(3)
(4)
(5)
Example [ESC] WB [LF] [NUL]
This command makes the printer send information on its status and free space of
the receive buffer regardless of the setting of "status response/no status
response." The status to be transmitted is the current printer status, and
indicates the latest status only. The remaining count indicates the remaining
count of the batch currently being printed.
waiting to be printed is transmitted. Free space of the receive buffer for the
interface which sent this command, is returned to the host.
This command is available for the RS-232C, USB, Centronics interfaces, and
socket communications. However, when SPP mode of Centronics is selected,
the printer returns a status to the Nibble mode negotiation immediately after this
command is received. When ECP mode of Centronics is selected, the printer
returns a status to the reverse request immediately after this command is
received.
The printer returns the status only for the interface which sent this command to
the host.
After the code of the Bit Map Writable Character Command ([ESC] XD) or Graphic
Command ([ESC] SG) is received, the Status Request Command is not
processed until the printer receives the data specified for the type of data.
A max. delay of 20 msec may occur until the printer sends the status after
receiving the Status Request Command.
The interval from when the Status Request Command is sent to when the next
Status Request Command is sent should be 20 msec or more. If the interval is
less than 20 msec, the printer may fail to receive the next Status Request
Command.
- 228 -
[ESC] WB
No remaining count of the batch