Pass-Through Command - Toshiba B-SX4T Series Specification

6.3.42 PASS-THROUGH COMMAND

Function Passes the serial interface data through the internal serial interface (CN14).
Format [ESC] @002; aaa, bbb --- bbb [LF] [NUL]
Term aaa:
bbb --- bbb:
Explanation This command is used for making a serial communication with the RF-ID module. The
number of bytes of data specified by this command is output to the internal serial
interface (CN14: RF-ID) without being processed.
serial interface (CN14: RF-ID) is output to the serial interface.
Number of bytes to be passed through
001 to 999
Binary data to be passed through
- 237 -
[ESC] @002
Data received from the internal