Toshiba B-SX4T Series Specification page 188

B-sx4t series, b-sx5t series external equipment interface specification
Hide thumbs Also See for B-SX4T Series:
Table of Contents

Advertisement

[E: Strip (Feed mode: E)]
Expansion I/O is installed:
The strip sensor is ignored. A feed is performed by checking a PAUSE signal
generated from the expansion I/O.
Strip position
Head position
Expansion I/O is not installed:
The strip sensor is ignored. A feed is performed.
Strip position
Head position
*1
Feed mode E is different from feed mode D. In feed mode E, a label is fed,
regardless of whether or not a label to be stripped is placed.
*2: The peripheral device such as an applicator, must control the PAUSE signal
generated from the expansion I/O.
(1) Place paper.
The PAUSE signal generated from the expansion
I/O, is turned ON.
(2) Remove the label.
The PAUSE signal generated from the expansion
I/O, is turned OFF.
(3) Feeds back to the home position.
(4) Completes a feed.
(Completes feeding to the top of form and stops)
The PAUSE signal generated from the expansion
I/O, is turned ON.
(1) Place paper.
(2) Feeds back to the home position
(3) Completes feeding to the top of form and stops
- 184 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents