Bar code height calculation method
Example) In the following conditions:
203-dpi print head, Module width: 02, Recommended bar code height: 33x
(25.4 m / 203 dpi) x 2 dots x 33x ≈ 8.25 m
Since the height is specified in units of 0.1 mm, "0082" or "0083" is to be set as 8.25 mm.
Max. number of data digits
Version of bar code
GS1 DataBar
GS1 DataBar Stacked
GS1 DataBar Stacked Omnidirectional
GS1 DataBar Limited
GS1 DataBar Expanded
GS1 DataBar Expanded Stacked
*1: Max. 74 digits/41 digits, including AI and FID.
In the following case, the print results vary in spite of the same number of digits.
Non printable:
Printable:
Check digit exclusively for each bar code version
Version of bar code
GS1 DataBar
GS1 DataBar Stacked
GS1 DataBar Stacked Omnidirectional
GS1 DataBar Limited
GS1 DataBar Expanded
GS1 DataBar Expanded Stacked
For the check digit calculation method, refer to ISO 24724 or AIM ITS 99-001.
"1A2B3C4D5E6F7G8H9I0J1K2L3M4N5O6P7Q8R9S0T1U2V3W"
"ABCDEFGHIJKLMNOPQRSTUVW12345678901234567890123"
- 370 -
Max. number of digits
13 digits (Numeral only)
13 digits (Numeral only)
13 digits (Numeral only)
13 digits (Numeral only)
74 digits (Numeral only) *1
41 digits (Alphabet only)
74 digits (Numeral only) *1
41 digits (Alphabet only)
Check digit
MOD79
MODE79
MOD79
MOD89
MOD211
MOD211