Batch Reset Command - Toshiba B-SX4T Series Specification

B-sx4t series, b-sx5t series external equipment interface specification
Hide thumbs Also See for B-SX4T Series:
Table of Contents

Advertisement

6.4.4

BATCH RESET COMMAND

Function
Resets the printer.
Format
[ESC] Z0 [LF] [NUL]
Explanation
• This command is not executed until the printer enters an idle state.
• Some values in the Parameter Set Command ([ESC] Z2;1) and the Fine Adjustment
Value Set Command ([ESC Z2;2]), will take effect when the printer is initialized. This
command should be sent after the Parameter Set Command ([ESC] Z2;1) or Fine
Adjustment Value Set Command ([ESC] Z2;2) is sent.
(zero)
[ESC] Z0
- 247 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents