6.3.40 SOCKET COMMUNICATION PORT SET COMMAND
Function
Enables or disables the socket communication, and sets the communication port
number to be used.
Format
[ESC] IS; a, bbbbb [LF] [NUL]
Term
a:
bbbbb:
Explanation
These settings can also be made in the system mode. The setting which was last
made takes effect.
Example
To enable the socket communication and set the port number to "8000".
[ESC] IS; 1, 08000 [LF] [NUL]
0: Socket communication is disabled.
1: Socket communication is enabled.
Port number (It must be set in 5 digits.)
00000 to 65535
- 235 -
[ESC] IS