Download  Print this page

E-mail - Toshiba B-SX4T Series Specification

B-sx4t series, b-sx5t series external equipment interface specification.
Hide thumbs

Advertisement

LCD Messages
of Upper Line (English)
EEPROM ERROR
SYSTEM ERROR
RFID WRITE ERROR
RFID ERROR
INPUT PASSWORD
PASSWORD INVALID
RFID CONFIG ERR

9.3 E-MAIL

The printer can notify the PC of the printer status by e-mail. The status to be notified by e-mail is the
same as the status which is notified through the serial interface. For details, refer to the Network
Specification (TAA-1401).
Printer Status
An EEPROM for back-up cannot be
read/written properly.
(a) A command has been fetched from an
odd address.
(b) Word data has been accessed from a
place other than the boundary of the word
data.
(c) Long word data has been accessed from
a place other than the boundary of the
long word data.
(d) An undefined command in a place other
than the delay slot has been decoded.
(e) An undefined command in the delay slot
has been decoded.
(f) A command which rewrites the data in the
delay slot has been decoded.
Writing data onto the RFID tag continuously
failed for the maximum number of RFID write
retries.
The printer cannot communicate with the
RFID module.
The printer is waiting for a password to be
entered.
Password
entered
consecutively for three times.
B-SX704-RFID-U2-US-R only
RFID module's destination code is not
specified
- 273 -
was
not
correct
Output Signal
Busy
Select
nFault
H
L
L
H
L
L
H
L
L
H
L
L
H
L
L
H
L
L
H
L
L
PError
L
L
L
L
L
L
L

Advertisement

Table of Contents

   Related Manuals for Toshiba B-SX4T Series

Comments to this Manuals

Symbols: 0
Latest comments: