In the case of UPC
(Example) UPC-A + 2 digits
In the case of bar codes other than JAN, EAN, and UPC
(10) Start/Stop Code
This parameter is valid only when the type of bar code is CODE39 and NW7.
Where the parameter is designated, the program will not check if the stop code and the
start code are attached to the print data to be sent.
When the parameter is omitted in the case of CODE39 and NW7, a start/stop code will
be attached. The code to be added is "*" in the case of CODE39, and "a" in the case
For details, refer to chapter 15 "AUTOMATIC ADDING OF START/STOP CODES".
- 126 -