f: User block password read/write permanent lock designation (Effective to
Bank4 to Bank8 only)
1. Once a permanent lock is enabled for parameter b, d, or f, any
subsequent change is disabled.
2. When read/write permanent lock is selected, a read/write lock state is
retained. To permanently prohibit reading/writing a tag, enable both
the read/write lock and the read/write permanent lock. The setting
which disables read/write lock and enables read/write permanent lock
allows the tag to be read/written permanently.
Xghhhhhhhh: User block access password execution setting (Effective only when the
Hibiki tag is used for the B-SX704-RFID-U2-R.)
Designates a password to access and write a tag of which user block is
Up to five user blocks can be specified continuously.
For example: X4AABBCCDD,X5BBCCDDEE,X6CCDDEEFF
g: Designates a user area bank. (4 to 8)
4: Bank4 (User block 1)
5: Bank5 (User block 2)
6: Bank6 (User block 3)
7: Bank7 (User block 4)
8: Bank8 (User block 5)
hhhhhhhh: User block access password
Fixed to 8-digit hexadecimal number
00000000 to FFFFFFFF
(Omissible. When omitted, incrementing/decrementing is not performed.)
u: Indicates whether to increment or decrement
vvvvvvvvvv: Skip value (10 digits)
www---www: Print data string (Omissible)
Max. 512 digits, but the number of digits to be written is different depending
on the tag types.
01 to 99 (1 to 99 can also be used.)
Up to 20 fields can be designated using commas.
0000000000 to 9999999999
: Link field No. (Omissible)
- 114 -