Adding A Description For An Interface - Cisco WLC 5700 Series Interface Configuration Manual

Configuring Interfaces

Adding a Description for an Interface

SUMMARY STEPS
1. enable
2. configure terminal
3. interface interface-id
4. description string
5. end
6. show interfaces interface-id description
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Controller> enable
Step 2
configure terminal
Example:
Controller# configure terminal
Step 3 interface interface-id
Example:
Controller(config)# interface
gigabitethernet1/0/2
Step 4 description string
Example:
Controller(config-if)# description Connects to
Marketing
Step 5 end
Example:
Controller(config-if)# end
OL-32314-01
Purpose
Enables privileged EXEC mode. Enter your password
if prompted.
Enters global configuration mode.
Specifies the interface for which you are adding a
description, and enter interface configuration mode.
Adds a description (up to 240 characters) for an
interface.
Returns to privileged EXEC mode.
Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
Adding a Description for an Interface
33