Installing A Brocade Mlx Router; Installation Precautions; General Precautions - Brocade Communications Systems MLX Series Installation Manual

Installing a Brocade MLX Router

This chapter describes how to install a Brocade MLX router and its modules in the following sections:
•

"Installation precautions"

•
"Installing 2x100GbE interface modules in Brocade MLX routers"
•
"Installing a Brocade MLX-4 router"
•
"Installing a Brocade MLX-8 router"
•
"Installing a Brocade MLX-16 router"
•
"Installing a Brocade MLX-32 router"
•
"Installing a Brocade MLX-32 router"
•
"Attaching a management station"
•
"Activating the power source"
•
"Verifying proper operation"
The illustrations in this chapter display how to correctly insert the modules and routers. For a complete router module description and slot
number identification, refer to
NOTE
Illustrations in this chapter may differ slightly from the actual equipment.
Installation precautions
Read the following cautions and danger notices before installing Brocade MLX routers.

General precautions

The procedures in this manual are for qualified service personnel.
All fiber-optic interfaces use Class 1 Lasers.
Do not install the device in an environment where the operating ambient temperature might exceed 40ºC
(104ºF).
Brocade MLX Series and Brocade NetIron XMR Installation Guide
53-1004195-02
DRAFT: BROCADE CONFIDENTIAL
on page 39
on page 46
on page 55
on page 64
on page 81
on page 86
on page 118
on page 119
on page 120
"Brocade MLX routers" on page 1 of this guide.
on page 43
39