Nibi-16-Fan-Exh-A High-Speed Fan Assemblies; Rack Mount Kit; Supported Software Features - Brocade Communications Systems MLX Series Installation Manual

Supported software features

The 32-slot router fan control modules include a bi-color LED, which indicates the status of the fans. <Link>Table 18 describes the states
for this LED.
TABLE 18 Brocade MLX and NetIron XMR 32-slot router fan control LED
LED Position
Fan control LED Rear of router
on the fan
assembly
The router ships with fan assemblies fully installed. Fan assemblies are hot-swappable, which means you can remove and replace them
without powering down the system.

NIBI-16-FAN-EXH-A high-speed fan assemblies

NIBI-16-FAN-EXH-A high-speed fan assemblies are required for Brocade MLX Series 16-slot routers when you install
NI-MLX-10Gx8-M, NI-MLX-10Gx8-D, or NI-MLX-1Gx48-T-A modules. Brocade MLX Series-16 routers ship with high-speed fan
assemblies factory installed. Refer to "Installing NIBI-16-FAN-EXH-A fan assemblies" on page 72 for high-speed fan installation
instructions.

Rack mount kit

Brocade MLX Series and NetIron XMR routers can be mounted in a standard 19-inch (EIA310-D) 2-post rack, using the pre-installed
mounting brackets. For flush-mounting, simply use the mounting brackets as installed. For mid-mounting, move the pre-installed
brackets from the front edges of the device to the holes provided in the sides of the device. For more information, refer to the appropriate
installation chapter for your router model.
Supported software features
For a complete list of software features supported on Brocade MLX Series and NetIron XMR routers, refer to the Brocade MLX Series and
Brocade NetIron Family Configuration Guide.
38
State Meaning
Off The fans are not receiving power.
Green The fans are working and responding to commands from the
fan control module.
Red The fans are not working and not responding to commands
the fan control module.
Brocade MLX Series and Brocade NetIron XMR Installation Guide
53-1004195-02