Transferring Scratch Pad Memory Contents - Icom IC-2800H Instruction Manual

q Select the desired band with [BAND].
CALL
w Push [
CALL] for 2 sec. to select the se-
(MR)
lected band's call channel.
e Push [Y] one or more times to select a duplex
scratch pad memory; push [Z] one or more
times to select a simplex scratch pad memory.
r Push [MR] or [VFO] to exit the scratch pad
memory.
Transferring scratch pad
memory contents
Transferring scratch pad memory contents to the VFO is done
similarly to transferring memory/call contents.
q Push [M/C] to select the call channel.
• Push [CHG/L] if [M/C] is not displayed.
• "C" appears when the call channel is selected.
w Rotate the desired band's tuning dial to select the desired
scratch pad memory.
• One of "L1" to "L5" or "R1" to "R5" appears.
e Push the desired band's [S.MW] momentarily to indicate
memory channels.
• Push [S.MW] for 2 sec. to transfer the scratch pad memory to
VFO.
SCRATCH PAD MEMORY
r Rotate the desired band's tuning dial to select the desired
memory channel.
t Push [
MW] for 2 sec. to transfer.
(S.MW)
q Select the desired band with [BAND].
MW w Push [
CALL] for 2 sec. to select the se-
(MR)
A
lected band's call channel.
e Push [Y] one or more times to select a duplex
scratch pad memory; push [Z] one or more
times to select a simplex scratch pad memory
to be transferred.
r Push [FUNC] then [E MW] momentarily to indi-
cate memory channels.
• Push [MW] for 2 sec. to transfer the scratch pad
memory to VFO.
t Push [Y] or [Z] to select the desired channel.
• Call channel (C), VFO (- -) and scan edges (1A –
3B), as well as regular memory channels, can be
transferred in this way.
y Push [FUNC] then [E MW] for 2 sec. to trans-
fer.
8
41