Hitachi WJ200 Series Instruction Manual page 72

Group "d"
Func. code display
d001
d002
d104
Group "F"
Func. code display
F001
F002
F004
Group "A"
Func. code display
A001
A002
A165
b001
Group "b"
C001
Group "C"
H001
Group "H"
P001
Group "P"
U001
Group "U"
NOTE: Pressing the [ESC] key will make the display go to the top of next function
group, regardless the display contents. (e.g. A021
Func. code display
SET
: Moves to
SET
Func. code display
ESC
: Jumps to the next group
ESC
Save
SET
SET
SET
Data display (F001 to F003)
Data does not blink because of real time synchronizing
ESC
SET
: Saves the data in EEPROM and returns to
ESC
: Returns to func. code display without saving data.
SET
SET
SET
ESC
Data display
When data is changed, the display starts blinking, which means that
new data has not been activated yet.
ESC SET
: Saves the data in EEPROM and returns to
ESC
: Cancels the data change and returns to func. code display.
ESC
ESC
ESC
data display
0.00
ESC
50.00
ESC
50.01
ESC
00
ESC
01
ESC
Press the both up and down key at the same
time in func. code or data display, then
single-digit edit mode will be enabled.
Refer to 2-34 for further information.
[ESC]
b001)
2−27
func. code display.
func. code display.